Muratec F-320 manual Soft keys, Setting the Soft Key, Select Soft Key No Comm. Cancel

Soft keys

Soft Keys are shortcut keys. You can assign some functions into these eight keys as you want. If the light above any one of these keys glows, that means the setting programmed into that key is active.

The following functions are assigned at the factory:

•Communication cancel / confirmation (see pages 2.6–2.8)

•Broadcast (see page 3.9)

•Communication options (to select advanced fax features)

•Dialing pause (to enter the dialing pause and the dialing characters. See pages 2.2 and 3.1)

•Speed dial / Group (see pages 3.4–3.7)

•Monitor / Call request (see pages 2.5 and 3.23)

•Confirmation report (see page 3.20)*

•Memory transmission (see page 2.2)*

Other functions you can assign to the Soft Keys are as follows:

•Fax & Copy (see page 3.19)*

•Send TTI (see page 4.2)*

•Select usual TTI (see page 1.20)*

•Security reception (see pages 3.42–3.43)

•Separator page setting for reception (see page 3.21)

•Bypass tray priority (see page 4.7)

•Cover page (see pages 3.21–3.22)*

•Auto answer (to toggle the Manual answer and Auto answer)

•Select TO/CC/BCC (Available only when the optional Internet Fax kit is installed.)

*When you change the setting by using the Soft Key, it will be available only for the next transmission. Once that transmission is complete, your machine returns to its default setting. If you want to change the default setting, see “Changing the default settings” on page 4.1–4.10

Note: When the optional printer controller is installed to your machine, one of Soft Keys, which was assigned to Memory transmission at the fuctory, will be changed to the ONLINE key. For details, see the operating instructions included with the printer controller kit.

Advanced features

Setting the Soft Key

1 Press MENU, 2, 1, 0, 3, ENTER. The LCD shows:

Select Soft Key No. 1:Comm. Cancel

. . . or indicates another function you’ve stored into the Soft Key 1.

2 Press or until the Soft Key (1-8) you want to change appears.

3 Press ENTER. The LCD shows:

8:Memory Tx $/#/Enter

4 Presskey. or until the function appears that you want to program into the

5 Press ENTER to save the setting.

The LCD will display the next Soft Key.

If you do want to set this Soft Key, go back step 3.

If you do not want to set the currently displayed Soft Key but do want to set another Soft Key, go back to step 2.

If you do not want to set any more Soft Keys, press STOP to finish.

Now you can use the labels included in your machine’s original packaging to label the Soft Key function you just set.

3.15