Muratec F-320 manual Using the bypass tray, If the paper runs out while copying

Basic operation

Using the bypass tray

When you need to use a size of paper not currently loaded in your machine’s paper cassette(s), or when you want to use a special type of paper (such as transparency film), use the bypass tray.

Important: Your machine automatically selects suitable paper according to the document size and reduction rate. So, if the suitable sized paper for your copying is in the paper cassette, the machine will use it even if you set the paper in the bypass tray.

Note: If the same sized paper is set in the both the paper cassette and bypass tray, turn the bypass tray priority mode (see page 4.7) to get the priority to use the paper which is set on the bypass tray than the paper in the cassette.

Note: If loading transparency (OHP) film into the bypass tray, be sure that the sheet is designed for laser printers and not for copiers. Also, be sure that the film does not have a paper backing and/or a leading strip. If it does, remove the paper backing and/or strip before inserting. Only film should go in, not film with any backing or strip.

1	Place your original document in ADF face up just as you would send a fax.
	Note: Place the original document in the same orientation as the paper in
	the bypass tray.
2	Set the paper in the bypass tray.
	See the table of “Acceptable paper size and cassette capacity” on page 1.7 and
	“Loading paper in bypass tray” on page 1.9 for more information.
3	If necessary, select desired document mode, contrast, reduction ratio.
4	Press START to begin the copying process.

Memory overflow message

If you’ve stored too much information in your machine’s memory, a “Memory Overflow” message may appear on the LCD:

Memory Overflow

Start Or Cancel

This appears because (1) too many pages have been stored in the memory, or (2) the pages that are stored have too much information on them for your fax machine to remember.

If this message appears, press START to tell your machine to copy as many pages in memory, or press CANCEL to delete from memory all pages stored during the current operation (but not previous operations).

Note: If you don’t operate your machine within 60 seconds, the machine will auto- matically print the document stored in the memory during the current operation.

If the paper runs out while copying

When your machine runs out of paper, it beeps, the ALARM light glows and the LCD shows which source has run out of paper – the 1st cassette, 2nd cassette (optional) or the bypass tray.

In this example, the machine runs out of the paper in the 1st cassette:

1st Cassette

Please Supply Paper

If you want to cancel the current copying job, press STOP. Otherwise, supply the paper to displayed paper source to resume the copying.

2.12