Muratec F-320 manual Bypass Tray priority, To adjust the copy print settings, Margin 00-85 24 mm

Changing the default settings

Bypass Tray priority

If you set the same sized paper to both the paper cassette and bypass tray, and this mode is turned to on, the machine gives priority to use the paper which is set on the bypass tray than the paper in the cassette.

To adjust the copy print settings

Default setting: Copy reduction rate: 100%, Margin: 24 mm, Bypass tray priority: Off

1 Pressing: MENU, 2, 3, 2, ENTER. The LCD shows the current reduction rate for copy-

Prt Reduc.Rate :100% $/#/Enter

2	Press or		until the reduction setting you want appears.
3	Press ENTER to save the setting. The LCD shows the current print margin:
		Margin
		(00-85)	24 mm

4	Use the numeric keypad to enter the print margin you want. If necessary,
	press		or	to move the cursor.
5	Press ENTER to save the setting. The LCD shows the current setting for bypass
	tray priority:
		Bypass Priority :Off
				$/#/Enter
6
	Press		or	until the setting you want appears.
7	Press ENTER to save the setting.

4.7