Muratec F-320 manual Settings for operation, Setting the silent mode

Changing the default settings

Settings for operation

Setting the silent mode

Default setting: OFF.

Silent mode allows you to mute the ringer, the alarm and the key tones.

• Ringer Silent — If you turn the ringer off in silent mode, a ring alerts you when you receive fax or voice call and a call request.

• Alarm Silent — If you disable the alarm in silent mode, the sound your machine makes when an error occurs and the beep your machine makes after sending or receiving a fax or making a copy cannot be heard.

• Key Buzzer Silent — If you mute the key tone, your machine will not make a sound when you press the buttons on the control panel.

1 Press MENU, 2, 1, 0, 4, ENTER. The LCD shows your fax’s current setting:

Silent Mode :Off $/#/Enter

2	Press or until the mode you want appears.
	Note: If you chose On, the silent mode of Ringer, Alarm or Key tone can be
		set to be available. If you chose Off, the machine will ring and beep as
		usual.
	If you chose Off, skip to step 10.
3	Press ENTER to save the setting. The LCD now asks if you want the ringer to be
	on or off:
		Ringer Silent	:Off
		$/#/Enter

6 Press or until the mode you want appears.

If you want to turn off the alarm, select “On” and the machine will be quiet. Otherwise, the machine will beep.

7	Press ENTER to save the setting. The LCD now asks if you want the key tones on
	or off:
		KeyBuzzer Silent:Off
				$/#/Enter
8
	Press		or	until the mode you want appears.
	If you want to turn off the tones, select “On” and the machine will be quiet.
	Otherwise, the machine will beep when the keys are pressed.
9	Press ENTER to save the setting.
	If you turned off the alarm or the key tones in the steps above, your machine
	gives you the option of setting the volume for the alarm and key tones. If this
	option appears, skip to step 10.
	If you didn’t turn any of these off, your fax machine returns to standby mode.
10	The LCD shows your fax’s current setting:
		Alarm&Key Volume:Mid
				$/#/Enter
11
	Press		or	until the mode you want appears.
	Below are the possible settings:

4	Press or until the mode you want appears.
	If you want to turn off the ringer, select “On” and the machine will be quiet.
	Otherwise, the machine will ring.
5	Press ENTER to save the setting. The LCD now asks if you want the alarm turned
	on or off:
		Alarm Silent	:Off
		$/#/Enter

Alarm&Key Volume:Max $/#/Enter

Alarm&Key Volume:Mid $/#/Enter

Alarm&Key Volume:Min $/#/Enter

12 Press ENTER to save the setting.

=Loudest setting.

=Medium setting.

=Low setting.

4.8