Muratec F-320 manual Searching the functions using the cursor key

Getting started

Searching the functions using the cursor key

Even if you don’t remember the exact commands needed for an operation, you can search for and enter almost all of your unit’s functions using the MENU key, Cursor key and the ENTER key.

Note: You can also search for any function with the function table (see pages 1.13 – 1.17). Keep a copy of this table nearby for reference.

To search and enter the function set- tings:

1	Press MENU.
2	Search the level one function
	groups using or until
	your desired item appears.
3	After you find the level one function item you want to program, press			to go
	to the level two function groups.
4	Search the level two function groups using	or	until your desired item
	appears.
5	After you find the level two function item you want to program, press			to go
	to the level three function groups .
6	Search the level three function groups using	or	until your desired func-
	tion appears.
7	Press ENTER to entry the function setting.

Note: You can go back to previous level function groups by pressing before you have entered the level three function by pressing ENTER. If you want to go back to previous level function group after entering the level three function, press BACK.

Note: Stop the operation at any time by pressing STOP.

1.11