Philips DVDR615 user manual Connecting a camcorder to the front jacks, Option 1 Using DV in jack

Connecting Additional Devices (cont’d)

E n g l i s h

Connecting a camcorder to the front jacks

	S-VIDEO OUT	VIDEO OUT AUDIO OUT
DV OUT
	1	2L
		R
	OR
CH-	CH+	CH-	CH+

You can use the front jacks to copy camcorder recordings. These jacks are located behind the flap on the right hand side.

Option 1: Using DV IN jack

Use this connection if you have a Digital Video or Digital 8 camcorder. The DV jack will conforms to the i.LINK standard. It provides the best picture quality.

●Use an i.LINK 4-pin cable to connect the DVD recorder’s DV IN jack to the appropriate DV output jack on the camcorder.

Before start operating, select ‘CAM 2’ as the input channel.

For recording, see pages 39~40.

Helpful Hints:

–The DV IN jack is not support the connection to a Personal Computer.

–The DV jack on this recorder can only receive input signals, it cannot output signals.

18

Option 2: Using S-VIDEO In or VIDEO In jack

Use S-VIDEO connection if you have a Hi8 or S-VHS(C) camcorder. It provides very good picture quality.

Alternatively, you can use VIDEO connection if your camcorder has only a single video output (Composite Video, CVBS.) It provides good picture quality.

1Use a S-video cable to connect the DVD recorder’s S-VIDEOinput jack to the appropriate S-VHS output jack on the camcorder.

OR

Use a video cable (yellow plug) to connect the DVD recorder’s VIDEO input jack to the appropriate video output jack on the camcorder.

2Use an audio cable (red/white) to connect the DVD recorder’s AUDIO L/R input jack to the audio output jack on the camcorder.

Before start operating, select ‘CAM1’ as the input channel.

For recording, see pages 39~40.

DVDR610_615_37_Engfinal434 18 8/16/04, 4:04 PM 3139 246 14221