Muratec F-320 Invalid Number, Invalid Passcode, Line Busy, Macro In Use, Memory Overflow, No Drum

Just in case …
What you see on the LCD	What it means/What to do
Document Jam	An original document jam while you are using
ContStor Enter/Cancl	the ADF for either faxing or copying. See page
	5.1 for instructions on clearing the jam.
Document Stored	You tried to erase a batch box which contains at
	least one document. Erase the document(s), then
	try again.
Enter No. (0-32)	You tried to enter a call group number greater
	than 32. Your machine can maintain 32 call
	groups, numbered 1-32 (call group 0 covers all
	the groups). Determine the correct call group
	identifier number and enter it, instead.
Enter No. (000-255)	If the optional NIC (network interface card) is
	attached to your machine, and you tried to enter
	a TCP/IP address greater than 255.
	Enter the correct TCP/IP address.
Feeder In Use	The command you’re trying to enter requires the
	use of the ADF, which is already in use. Wait for
	the machine to stop using the ADF, then try
	again.
Hang Up Phone	The optional handset is off-hook.
	Hang it up, making sure the upper part of the
	handset presses down on the “hook” button.
In Relay Box	You tried to store a document for polling in an
	F-Code box which is set to be a relay box.
	Select an F-Code box which is set to be a bulletin
	box, then try again.
In Secure Box	You tried to store a document for polling in an
	F-Code box which is set to be a security box.
	Select an F-Code box which is set to be a bulletin
	box, then try again.
In Use in P OneTouch	You tried to erase the F-Code box or Batch box,
	which is programmed in the programmable one-
	touch key.
	Erase the programmable one-touch key that con-
	tains the F-Code box or Batch box you want to
	erase, then try again.
Invalid I.D. Code	The F-Code box I.D. code you entered isn’t valid.
	Try re-entering your F-Code box I.D. code.

What you see on the LCD	What it means/What to do
Invalid Number	You pressed a key which has no function during
	the current operation.
Invalid Passcode	The protection passcode you entered isn’t valid.
	Repeat the operation, entering the correct protec-
	tion passcode.
Line Busy	You tried to erase a document which someone is
	polling from your machine. Wait for the fax to
	complete the polling operation, then try again.
Macro In Use	You tried to change the function for a Soft key,
	but that Soft key has been programmed in a
	Macro key. You cannot change the Soft key func-
	tion until erase the Macro key that contains the
	Soft key you want to change. Erase the Macro
	key, then try again.
Memory Overflow	During transmission (or copying), you tried to
Start Or Cancel	enter more pages into memory than your fax
	could store. Press START to tell your fax to keep
	as many pages in memory as possible, or press
	CANCEL to delete from memory all pages stored
	during this operation (but not previous opera-
	tions).
No Command	You pressed COMM.CANCEL/CONFIRM. to review
	upcoming commands, but your fax machine had
	none stored.
No Department Code	You tried to turn on the department code setting
	but there are no department codes stored in
	your fax machine. Store at least one department
	code, then try again.
	. . . or . . .
	You entered incorrect department code at fax
	sending while the department feature is on.
	Enter correct department code.
No Document Stored	You tried to print a document from memory, but
	your fax machine had none stored.
No Drum	The drum cartridge is missing or has not been
	properly installed in your fax machine.
	Please properly install the drum cartridge.

5.6