Muratec F-320 Setting of the Paper Size, 1st Cassette Ltr $/ #/Enter, Bypass Tray Ltr $/ #/Enter

Setting of the Paper Size

Default setting: Ltr (Letter-sized paper)

When you change the size of paper in the paper cassette, you must also change the paper size setting, as shown below.

1	Press MENU, 2, 1, 0, 1, ENTER. The LCD shows:
		1st Cassette			:Ltr
				$/#/Enter
2
	Press		or	until the recording paper size for the first cassette you want
	appears.
3	Press ENTER. The LCD shows:
		Bypass Tray			:Ltr
				$/#/Enter
4
	Press		or	until the recording paper size for the bypass tray you want
	appears.
5	Press ENTER.
	Press STOP to return to standby mode.

Getting started

Loading paper in bypass tray

When you need to use a size of paper not currently loaded in your machine’s paper cassette(s), or when you want to use a special type of paper (such as transparency film), use the bypass tray.

1 Open the bypass tray on the right side of your machine.

2 Pull out the hopper of the bypass tray and raise the flapper release lever.

3 Place the paper on the bypass tray. Adjust the paper guide to fit the paper and insert the paper until it comes to a stop.

Then lower the flapper release lever.

4 When you load the paper on the bypass tray, the LCD will show the primary paper size you’ve set. (See “Setting of the paper size,” left column.)

Set Bypass Ppr:Ltr $/#/Enter

5 Press or until your desired recording paper size appears. Note: If you use transparency film, select “OHP”.

6 Press ENTER.

Note: If you have set the Letter , Legal , Half-letter sized paper in the bypass tray, the machine will use them when it runs out of the paper in the paper cassette during the fax reception.

1.9