Muratec F-320 manual Contrast $/ #/Enter, Reserved ** Jan 29 2002 517pm, Select Program No Delayed

13 The LCD asks which document mode you want each time you use this pro- grammable one-touch number.

Document Mode:------

$/#/Enter

14	Press		or	until the mode you want appears.
	Note: For any of the following settings, choosing “---” tells the machine to
			use its default setting for this programmable one-touch key.
15	Press ENTER. The LCD asks which contrast mode you want each time you use
	this programmable one-touch number.
		Contrast			:-------
					$/#/Enter
16
	Press		or	until the mode you want appears.
17	Press ENTER. The LCD asks if you want the Fax & Copy feature on or off each
	time you use this programmable one-touch number.
		Fax & Copy			:---
					$/#/Enter
18
	Press		or	until the mode you want appears.
19	Press ENTER.
20	Press STOP to return your machine to standby mode.

Fax dialing with programmable one-touch

To dial a fax call using a programmable one-touch number:

1 Set your document in the ADF.

2 Make any necessary adjustments as usual.

3 Press the programmable one-touch key in which you’ve stored the fax commu- nication command.

Your fax will perform the operation now, or at whatever time you programmed.

Note: To review the details of each operation, review the instructions for that operation. See page 3.33 for a list of each operation and where to find it.

Advanced features

If you programmed this key to delay its operation, the LCD shows:

** Reserved ** Jan 29 2002 5:17pm

If you programmed this key to perform the operation immediately after you press it, the LCD shows the number:

9-1-972-555-4335

A4 Normal

Printing a list of your programmable one-touch keys

You fax machine can print a list of the commands you’ve stored in your programma- ble one-touch keys.

The list includes:

(1)each key’s one-touch number

(2)the fax/telephone number

(3)when the command should start

(4)which command you’ve selected

(5)if applicable, the selected call group(s) or F-Code box(es) you’ve stored in the key

(6)the individual settings for each key

To print a list of programmable one-touch keys, press MENU, 5, 1, 1, 1, ENTER.

Erasing a programmable one-touch key

1 Press MENU, 3, 4, 2. The LCD shows:

Select Program No. 57:Delayed

2 Select the programmable one-touch key you want to erase.

Note: You can select the programmable one-touch key by pressing that key on the control panel.

3 Press ENTER. The following two displays will appear alternately:

57:Erase P One-Touch		57:Erase P One-Touch
Yes →	Enter	No	→	Cancel

Important: If you want to quit without erasing the one-touch number you’ve selected, press CANCEL. The fax will return to step 2.

4 Press ENTER to erase the number.

To erase another program one-touch number, repeat steps 2–4. Or press STOP to return to standby mode.

3.41