Muratec F-320 03Erase F-Code Box Enter I.D. Code, Select F-Code Box Box In Use, Enter Sub-Address

Erasing an empty F-Code box

An F-Code box must be empty in order to erase it. (If you select an F-Code box in these steps which is not empty, the machine beeps. If this happens, print all docu- ments in that box before erasing it.)

To erase an empty F-Code box:

1 Press MENU, 3, 5, 2, ENTER. The LCD shows:

Select F-Code Box 01:No Number Stored

2 Use the numeric keypad to enter the two-digit identifier number (01-50) of the F-Code box you want to erase.

3 Press ENTER. If the F-Code box is empty, the LCD shows:

03:Erase F-Code Box Enter I.D. Code:****

Important: If you select an F-Code box which is not empty, the machine beeps and, before returning to step 2, briefly displays:

Select F-Code Box

Box In Use

Print any documents received in the F-Code box, then repeat this procedure from the beginning to erase the box. Otherwise, select another F-Code box.

4	Use the numeric keypad to enter the four-digit I.D. code.
5	Press ENTER.
	If you’ve entered an incorrect I.D. code, your fax machine rejects the attempt
	and returns to standby mode.
	If you’ve entered the correct I.D. code, the following two displays will appear
	alternately:
		03:Erase F-Code Box		03:Erase F-Code Box
		Yes →	Enter	No	→	Cancel

Note: If you want to quit without erasing the F-Code box you’ve selected, press CANCEL. The fax will return to step 2.

Note: If you want to quit without erasing any F-Code box, press STOP. The machine returns to standby mode.

Advanced features

6 Press ENTER to erase the F-Code box.

To erase another F-Code box, repeat steps 2-6. To finish, press STOP.

F-Code transmission and polling

With F-Code, your machine can send secure transmissions, perform relay broadcast initiations and even poll from other ITU-T-equipped machines, regardless of manu- facturer.

You can do this two ways:

•Using the programmable one-touch key (see pages 3.36–3.38)

•Entering the ITU-Tsub-address and password directly, which is what we’ll describe here.

Note: For F-Code communication to work, three things must be true:

•The remote fax machine must support ITU-Tsub-addressing

•The remote fax must have a mailbox with an ITU-Tsub-address created on it

•You must know the ITU-Tsub-address and password (if any) for the remote machine’s mailbox

F-Code transmission

1 Insert the document.

2 Adjust the document mode and contrast if necessary.

3 If you want to toggle between real time transmission and memory transmis-

sion, press MEMORY TRANSMIT.

4 Press COMM. OPTIONS three times and then press ENTER.

Enter Sub-Address

_

5 Use the numeric keypad to enter the appropriate sub-address in the remote machine.

Note: If you make a mistake, press CANCEL to erase the character, then enter the correct number.

6 Press ENTER. The LCD shows:

Enter Password

_

Note: If this sub-address does not have a password, skip to step 8.

3.31