Muratec F-320 manual Entering characters, Your Name Upper, Your Name Lower, $/ #/ !/ /Enter

Getting started

Entering characters

Some settings give you a chance to enter characters; for your TTI, remote fax’s name or others. To enter letters or other characters, use the following guidelines:

Using numeric keypad to enter characters

You can enter 40 letters, digits or symbols (and space) using the numeric keypad as shown in the character table below.

Pressing the 2 numeric key once, for example, will enter an “A”. Pressing 2 twice, will enter a “B”. If you want to enter “LA”, for example, you would press 5, 5, 5, 2.

When you want to enter two characters that share the same numeric key (“D” and “E”, for example), press to move the cursor to the right after you enter the first letter. For example, if you want to enter “ABC”: press 2, , 2, 2, , 2, 2, 2.

Canceling characters

If you entered an incorrect letter or digit, press CANCEL to erase to the left. To change just one character in name and/or digit, press or to move the cursor to that character or digit. Then press CANCEL to erase it. Re-enter the character or digit correctly.

To change upper/lower case

Your Name ;Upper

_

Press #(CAPS) key to toggle upper case and lower case.

The word “Upper” means the machine will enter only upper-case letters. To type a lower-case letter, press #(CAPS) key.

The LCD changes to:

Your Name ;Lower

_

This means the machine will enter lower-case letters.

To switch back for upper-case entries, press #(CAPS) key again.

Entering the special characters

You can also enter special characters or symbols.

1	When the machine prompts you to enter a name, press * key.
	The LCD changes to:
		· @- _ , / : & ’ ! ?"# $ % ( ) ∗ +
		$/#/!/"/Enter
2
	Select the character you want to enter using , , or of cursor key.
3	To enter the character, press ENTER key.
4	If you want to enter other character, repeat steps 1–3.
	Otherwise, go to next step.
5	Press ENTER to save the name.

1.12