Muratec F-320 manual Box Type Bulletin $/ #/Enter, Overwrite Doc. Off $/#/Enter

Advanced features

12	Use the numeric keypad to enter this box’s ITU-T-compatible password. This
	password can be up to 20 characters in length and include any combination of
	numbers and the * and # characters (but no other non-numerical characters).
	Note: You cannot change the type of an existing F-Code box. If you’re modi-

fying an existing F-Code box and want to change the box type, you first must erase the old box, then create a new one.

13 Press ENTER to save the password. The LCD now shows:

		Box Type :Bulletin
		$/#/Enter
	The fax machine is asking which box type you want to assign to this box —
	bulletin, security or relay.
	Press or until the type of box you want appears.
14	Press ENTER.
	If you chose Bulletin, go on to step 15.

If you chose Security, skip to step 16.

If you chose Relay, skip to step 19.

If you chose Bulletin:

15 The bulletin box has four additional settings:

•Reception protection (“Rx Protect” on the LCD)

•Automatic printing of received documents (“Auto Print”)

•Overwriting documents (“Overwrite Doc.”)

•Erasure of transmitted documents (“Erase Tx Doc.”)

Rx Protect — Reception protection tells this box if it’s okay to receive documents from remote locations. Callers can then poll these documents.

Rx Protect	:Off
	$/#/Enter

On: Open this box to receive documents from callers.

Off: Do not open this box to receive documents from callers.

Press or until the mode you want appears.

Then press ENTER to save the setting and go on to the next one.

Auto Print — Automatic printing of received documents tells the fax machine if it should print a document automatically upon receiving it into this box.

Note: This setting is available only when the reception protection (Rx pro- tect) setting is set to off (see above).

Auto Print	:Off
	$/#/Enter

On: Print the document automatically when the box receives it.

Off: Print the document manually, when you want to print it.

Press or until the mode you want appears.

Then press ENTER to save the setting and go on to the next one.

Overwrite Doc — Overwriting documents tells your machine if it should overwrite (erase) existing documents when it receives a new one.

Note: This setting is available only when the reception protection setting is set to off (see Rx Protect above).

Overwrite Doc. :Off $/#/Enter

On: When your machine receives a new document into this box, it will erase any documents currently stored in it.

Off: When your machine receives a new document into this box, it will not erase the documents stored in it. Your machine can store up to 30 documents (each document can include one or more pages) in each box.

Press or until the mode you want appears.

Then press ENTER to save the setting and go on to the next one.

Erase Tx Doc — Erasure of transmitted documents tells your machine if it should erase a document from the box after a caller retrieves (polls) the document.

Erase Tx Doc. :Off $/#/Enter

On: Your machine erases the document from the box as soon as it sends it. If you choose “On”, this box can be polled only once per document.

Off: Your machine does not erase a document from the box when it’s polled. As long as your machine holds AC power and you do not erase the docu- ment from the box, the document is available indefinitely for polling.

Press or until the mode you want appears.

Press ENTER to save the setting. Then skip to step 23.

3.26