Muratec F-320 manual Cord plugs into a wall telephone jack

Getting started

9 AC power switch — Turns your fax machine on and off. 10 AC power jack — Where you plug in the AC power cord.

11 Bypass tray — Open the bypass tray to use the paper that is not set in the paper cassette. It can hold up to 50 sheets of paper. For details about paper capacity of the bypass tray, see “Specifications,” page AI.2.

12 Side cover — Open to fix a printout jam.

13 Side cover release — Pull this to open the side cover.

14 Recording paper size sticker — Shows the size of the paper that is set in the paper cassette.

15 Recording paper level indicator — Shows the level of the paper supply without requiring you to open the paper cassette.

16 Paper cassette — Set paper here. It can hold up to 500 sheets. For details about paper capacity of the paper cassette, see “Specifications,” page AI.2.

21 2322

LINE17PHONE218PHONE119 20

17	LINE jack — Where you plug in the telephone line cord. The other end of the
	cord plugs into a wall telephone jack.
18	PHONE2 jack — If you connect a second telephone to your machine, this is
	where you plug in the cord.
19	PHONE1 jack — Where you plug in the optional handset.
20	PRINTER PARALLEL port (optional) — Where you plug in the printer cable,
	when you use the optional printer controller.
21	RS-232C interface port (optional) — Where you plug in the RS-232C
	cable, when you use the optional RS-232C interface kit.
22	Extension paper tray — Holds up the printout after it emerges.
23	Printed document exit — Where the printout emerges.
24	Handset (optional ) — Used for voice communication. This handset is avail-
	able from your authorized Muratec dealer, and can be added when you

purchase the F-320 or as an upgrade afterward.

1.2