Muratec F-320 manual Setting Sleep mode Energy saving mode, Setting the paper source

Setting Sleep mode (Energy saving mode)

Default setting: On

Note: All LED lamps on the control panel will not be off, even when the machine is in the sleep mode.

If you want to change the Sleep mode to OFF, you can set it here.

1	Press MENU, 2, 1, 0, 5, ENTER. The LCD shows:
		Sleep Mode	:On
			$/#/Enter
2
	Press or until the mode you want appears.
3	Press ENTER to save the setting.

Setting the paper source

Default setting: 1st cassette: Fax/Copy, Bypass Tray: Fax/Copy

You can choose one of following for each paper source:

“Fax”: Select this if you want to use the paper source you selected for fax- ing and list (or report) printing.

“Copy”: Select this if you want to use the paper source you selected for copy- ing only.

“Fax/Copy”: Select this if you want to use the paper source you selected for fax- ing, list (or report) printing and copying.

“Not Used”: Select this if you want to use the paper source you selected for sepa- rator page (see page 3.21) or PC printing.

Note: PC printing is available only when your machine has the optional printer controller kit.

1 Press MENU, 2, 1, 0, 8, ENTER. The LCD shows:

Cassette1 :Fax/Copy $/#/Enter

2 Press or until the mode you want appears.

3 Press ENTER to save the setting. The LCD shows:

Bypass Tray:Fax/Copy $/#/Enter

Changing the default settings

4 Press or until the mode you want appears.

5 Press ENTER to save the setting.

Adjusting the machine’s clock

You can adjust the machine’s clock here.

1 Press MENU, 2, 1, 0, 7, ENTER. The LCD shows:

Enter Time
01/27 ’02	14:30

2 Use the numeric keypad to enter the current date and time to adjust the clock.

3 Press ENTER to save the setting.

Setting 2-bin tray (Option)

Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray

You will set where the printed paper emerges in this operation.

Note: This operation will appear only if the optional 2-bin tray has been attached

		to your machine.
1	Press MENU, 2, 1, 1, 0, ENTER. The LCD shows:
		2-Bin Tray			:Off
					$/#/Enter
2
	Press		or	until the mode you want appears.
	If you chose On, proceed to step 3.
	If you chose Off, skip to step 7.
3	Press ENTER. The LCD asks you to select Lower or Upper tray for copy exit.
	Press		or	until the tray you want appears.
		Copy Exit			:Lower
					$/#/Enter

4.9