Muratec F-320 manual Attach the paper-handling parts

Getting started

3 Unpack a new toner cartridge from its carton. Then, holding the toner car- tridge with both hands, slowly shake it to distribute the toner evenly inside the cartridge.

Note: Do not touch the roller of the toner cartridge.

4 Gently install the toner cartridge in the printer, making sure the toner car- tridge’s two pins fit in the slits inside the printer frame.

5 Unpack the drum cartridge from its carton.

Note: Shield the drum cartridge from light, especially strong light. Later, if you have to remove the cartridge from the machine, immediately wrap it in a thick cloth to protect it from light.

6 Gently install the drum cartridge in the printer, making sure the drum cartridge’s four pins fit in the slits inside the printer frame.

7 Gently clean the LED print head using the cleaning paper included in the toner cartridge carton box.

For best print quality, you should clean the LED head every time you change the new toner cartridge.

Note: Do not use abrasive materials on the LED print head, and do not subject the LED print head to strongly shock.

8 Gently close the printer cover.

9 Close the top cover.

Note: The fax machine will not work unless the cover is properly closed.

Attach the paper-handling parts

1 Attach the document tray by inserting it into the appropriate holes, as shown.

2 Attach the extension paper tray by inserting its two pegs at a slightly upward angle into the appropriate holes, as shown.

1.6