Muratec F-320 Clearing paper jams, If an original document jams, Reset Document Press Start Key

Models: F-320

1 142
Download 142 pages 15.36 Kb
Page 112
Image 112

Clearing paper jams

If an original document jams

1

If an original document jams in the ADF while scanning the document into the

 

memory for faxing or copying, the LCD will show:

 

 

Document Jam

 

 

 

ContStor Enter/Cancl

 

 

 

 

 

 

If you do wish to continue the operation, press ENTER and proceed to step 2.

 

To abort the operation, press CANCEL. This will erase from memory all pages

 

stored during this operation, and the machine will return to standby mode.

 

Important: If you wait more than 60 seconds without pressing any key, the

 

 

 

machine will erase from memory all pages stored during this

 

 

 

operation and the machine will ask you to remove the jammed

 

 

 

paper.

 

Note: If the document jammed in the following case, the following message

 

 

will appear and the machine will abort the operation anyway; instead,

 

 

you’ll have to perform the job again from the beginning.

 

 

 

The first page of the document jammed

 

 

 

During quick memory transmission

 

 

 

 

 

 

 

 

Open&Close ScanCover

 

 

 

 

Reset Document

 

 

 

 

 

 

 

 

Also, the “Repeat transmission. Error on scan at page xx” message

 

 

will be printed out if the document jammed during transmission.

2

The LCD will show which page (i. e., which page number) is jammed. To con-

 

tinue scanning from the jammed page forward (keeping in mind the Note at

 

the end of step 1, above), press START after clearing the jam.

 

 

 

 

 

 

 

 

p 2. Reset Document

 

 

 

 

Press Start Key

 

 

 

 

 

 

 

 

 

Note: If you wait more than 60 seconds without pressing any key, the

 

 

machine will begin to send or copy the document(s) it has.

 

If you wish to cancel this operation, press STOP. The machine will delete all

 

pages from memory and then return to its standby mode.

Just in case …

To remove the document:

1 Open the scanner cover.

If you can remove the document, remove it and skip to step 3.

If not, proceed to step2.

2 Open the inner cover and lift the document from the machine.

3 Gently close the scanner cover, making sure both sides are snapped down securely.

Note: If the original document has become wrinkled or torn, do not re-send it.

5.1

Page 112
Image 112
Muratec F-320 manual Clearing paper jams, If an original document jams, Document Jam ContStor Enter/Cancl