Muratec F-320 manual Making copies, How to make copies, Changing the reduction ratio

Making copies

Guidelines

Before you begin making copies, please read the following guidelines.

Acceptable document sizes

You can set up to 80 sheets of letter-sized document in the ADF at one time.

The acceptable document sizes for coping are same as for faxing. Refer to page 2.1.

Scanning width

The scanning width when you make copies is 8.5 inches, no matter the document size.

Note: If the document size is Letter, for example, the scanning area will be as follows:

Feed direction

Printing margin

The machine does not print approx. 0.12 inches on each side of the paper.

Basic operation

How to make copies

Your fax machine also doubles as a convenient copier. 1 Press COPY to change to Copy mode.

When the machine is in the Copy mode, the LCD shows:

#Of Pgs. To Copy 01 Fine

2 Place your original document in ADF face up just as you would sending a fax.

3 As needed, set the following:

•Adjust document mode and contrast

•Enter the number of copies

4 Press START to start the copying.

Note: When you make multiple copies, your machine always sort copies.

Note: To stop the copying, press STOP.

Changing the reduction ratio

Your fax machine is capable of reduction when copying. You can choose from 78% (Legal → Letter), 100% and Auto.

Note: If the “Auto” is set, the machine automatically reduce the original document size to fit on the paper size, which makes the margin as little as possible.

To change the reduction ratio:

1	Press MENU, 2, 3, 2, ENTER.
		Prt Reduc. Rate:100%
		$/#/Enter
2
	Press or until your desired ratio appears.
3	Press ENTER to save the setting.
4	Press STOP to return to the standby mode.

2.11