Muratec F-320 Settings for dialing, Changing the dialing pause length, Changing redial settings

Settings for dialing

Changing the dialing pause length

Default setting: 2 seconds.

The pause is set by the factory to last two seconds, but you can set it to last as long as ten seconds if necessary. To change the pause length:

1 Press MENU, 2, 2, 0, 5, ENTER. The LCD shows:

Dialing	Pause
(02-10)	02 sec.

2 Use the numeric keypad to enter the length you want for the dialing pause. Note: The length setting requires two digits. Always enter a leading zero for

lengths less than 10 seconds.

3 Press ENTER to save the setting.

Changing the default settings

Changing redial settings

Default setting: Number of redial: 2 times, Redial interval: 1 minute.

It’s up to you how many times the fax redials a number and how long it waits between redials (that length of time between calls is the redial interval).

To program the redial settings:

1 Press MENU, 2, 2, 0, 4, ENTER. The LCD shows:

# Of Redials
(02-15)	02 times

2 Use the numeric keypad to enter the number of redials you want. Choose from 2 to 15 redials.

Note: Enter a leading zero when entering a quantity less than 10.

3 Press ENTER to save the setting.

4 The LCD now shows:

Redial Interval
(1-5)	1	min.

5 Use the numeric keypad to enter the length you want between redial attempts. Choose from 1 to 5 minutes.

6 Press ENTER to save the setting.

4.5