Aastra Telecom 6753I Using the ACD Feature on your IP Phone, ACD LED Table, Using the ACD Key

Line Keys and Programmable Keys

Using the ACD Feature on your IP Phone

The ACD feature allows you to login to a phone queue in order to receive distributed calls on your IP phone. To login to a phone queue, you must preconfigure an ACD key on your IP Phone as described in the previous procedure.

Your Administrator sets up the queue that you access when you press the ACD Key. Contact your System Administrator for more information.

When you press the ACD Key, the phone prompts you to enter a User ID and Password to login into the queue. Once logged in, you can make your phone “available” or “unavailable” to take calls by pressing the Available/Unavailable Key (2). The server monitors your IP phone status. When you set the IP phone to “available,” the server begins distributing calls to your phone. When you set the IP phone to “unavailable,” the server temporarily stops distributing calls to your phone.

The LED for the ACD Key shows the current status of your phone.

ACD LED Table

This LED changes when you log into the phone queue and are available to take calls. The LED changes again when you are busy with an active call. The table below shows the status of the LED as they may appear on your IP phone.

Phone	Status: Logged In
Model	and Available	Status: Unavailable	Logged Out
6753i	Solid Red LED	Blinking red LED	No LED

Using the ACD Key

Use the following procedure to log into a phone queue from your IP phone.

IP Phone UI

1.Check with your Administrator to verify the queue linked to your ACD Key.

2.Press the ACD Key on your IP phone.

The LCD displays the label of the ACD queue you are accessing. The "User ID" prompt displays.

ACD: <Queue Label>

User ID:

= Next = Login

70 Model 6753i IP Phone User Guide