Aastra Telecom 6753I manual Preferred Line and Preferred Line Timeout

Preferred Line and Preferred Line Timeout

The 6753i has a feature called “preferred line” and “preferred line timeout”. If you enable the preferred line parameter on your phone, after a call ends (incoming or outgoing), the display switches back to the preferred line. Next time you go off-hook to make another call, you pickup on the preferred line. You can enable the preferred line parameter using the Aastra Web UI at the location, Basic Settings->Preferences->General.You can also set a preferred timeout parameter that specifies the number of seconds it takes for the phone to switch back to the preferred line.

Note: You can configure “Preferred Line” and “Preferred Line Timeout” using the Aastra Web UI only.

The following table provides the behavior of the preferred line focus feature with other features on the phone.

Phone Feature	Preferred Line Behavior
call return	The phone switches back to the focused line immediately after
	the call ends.
speeddial	The line is already specified when the speeddial is created. The
	phone switches back immediately after the call ends.
conference	For incoming calls, the phone switches back immediately after
	the call ends.
transfer	For incoming or outgoing calls, the current behavior is that the
	same line used to transfer the call does not change. For incoming
	calls, the phone switches back immediately after the call
	transfers.
blf	The phone switches back immediately after the call ends.
park	The phone switches back immediately after the call ends.
voicemail	The phone switches back immediately after the call ends.
redial	The phone switches back immediately after the call ends.
dialing	For incomplete dialing on a non-preferred line, the focus does not
	change if some digits are entered.
	If no digits are entered or digits were cleared, the focus changes
	to preferred line after the time out has passed without activities.
caller id	If the "Switch UI Focus To Ringing Line" parameter is disabled,
	the User is able to see the Caller ID when the phone switches the
	focus to the ringing line.
factory default	Factory default and recovery mode clears the "preferred line" and
	"preferred line timeout" parameters, and the phone operates in a
	non-preferred line mode.

Notes:

1. If you specify a value of “0” for the preferred line parameter, it disables the preferred line focus feature.

2.If you specify a value of “0” for the preferred line timeout parameter, the phone returns the line to the preferred line immediately.

Additional Features

Model 6753i IP Phone User Guide 175