Preliminary setup with Windows Vista | EN |
|
|
1.Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue LED will illuminate, indicating the mic is receiving power. Your computer will automatically recognize the USB device and install a driver.
2.In the lower right portion of your screen you may see a message that new hardware was found; or you may see a driver software installation notice.
3.To select the AT2020 USB as your default recording device, begin at your Start menu. Select Control Panel.
4.Select
5.Select the Recording tab. Make sure that the AT2020 USB microphone is set as the default recording device. (You should see a green check mark beside the USB microphone icon.)
10 | 11 |
