![](/images/new-backgrounds/1033321/3332165x1.webp)
Getting Started
Setting up N9061A on the
Logging
The N9061A application allows the logging of errors. These errors comprise details of command errors and legacy commands that have been received but are not supported by the N9061A application. To enable and view the error log select the Mode Setup hardkey from the front panel. Then select the Logging softkey.
Figure | Logging Menu Map |
Logging
Previous Page/Next Page
Logging
Previous Page
Next Page
Cmd Error Log
On Off
Refresh
Clear Log
When you are in the Logging menu, the main Signal Analysis display is obscured by the logging page. The most recent log starts from the bottom of the window. Previous Page and Next Page allow you to scroll through the log file. To include commands sent to the analyzer since the log window display was opened, press Refresh.
Cmd Error Log
The Cmd Error Log option allows you to turn the command error logging on or off. The default is Off. Logging should not be used in a secure environment. When set to On, all error messages are stored in a log file, regardless of whether they have been displayed on the screen. When set to Off, no further command error messages are written to the log file. Switching Cmd Error Log to Off does not clear the log file.
The log file is also stored as a text file, called Logfile.txt, on the instrument. It is stored in the D:\ drive, in a folder called \User_My_Documents\[USERNAME]\My Documents\RLC\data.
The maximum size of the log is 10 MB. When the file reaches its maximum size, the first ten percent of the file is automatically discarded, to clear space for subsequent error messages.
33