Agilent Technologies N9030a manual Mode Setup Legacy Instrument Selection Menu Map

Getting Started

Setting up N9061A on the X-Series Analyzer

Then, to select the legacy analyzer you wish to emulate, press the Mode Setup hardkey on the front panel. Figure 1-2shows the menu map that allows you to select the 8560 series analyzer or 8566A/B, 8568A/B and therefore the remote control commands to be used in the X-Series analyzer.

Figure 1-2 Mode Setup > Legacy Instrument Selection Menu Map

Mode Setup

HP8560 Series

Mode Setup

HP8560 series

HP8563E/EC

HP8566/68

HP8566B

Cmd Error

On Off

Logging

Preferences

Restore Mode

Defaults

HP8566/68

HP8566A

HP8566B

HP8568A

HP8568B

Logging

Preferences

HP8560E/EC

HP8561E/EC

HP8562E/EC

HP8563E/EC

HP8564E/EC

HP8565E/EC

The HP8560 series and HP8566A/B, 8568A/B key allow you to select which legacy instrument to emulate. The selected instrument determines the response to the “ID?” command and affects the behavior of commands such as IP. You can use any command offered by any of the legacy instruments regardless of the language setting. However, if the command is not correct for the selected legacy instrument there is no guarantee that the command will work as expected. This does not affect the response to the SCPI command “*IDN?”.

28