Programming Commands
MA Marker Amplitude Output
MA
Marker Amplitude Output
Syntax
MA;
LF
CR
SP
,
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
The MA command returns the amplitude level of the active marker if the marker is on the screen. If both the active marker and the delta marker are displayed, the MA command returns the amplitude difference between the two markers.
The format of the returned data when using the MKA command is dependent on the currently set trace data format (refer to TDF, MDS, O1, O2, O3, or O4) when the selected remote language 8566.
8560 Series: The marker amplitude is always returned as an ASCII value (TDF P).
NOTE | The functions of the MA command are identical to the MKA command |
| (page 241). |
|
|
231
