Programming Commands
ML Mixer Level
NOTE | If an external amplifier gain value is set, the mixer level is determined using the |
| following equation: |
| Mixer Level = Ref. Level - Attenuation + Ext. Amplifier Gain |
| The external amplifier gain is not preset by doing an IP command in case the |
| analyzer is measuring a large signal. This is to protect the analyzer from damage |
| from a large signal. For a helpful suggestion, see Chapter 3 , “Hints and Tips,” on |
| page 71. |
|
|
|
|
NOTE | For 8566A/B, 8568A/B, the functions of the ML command are identical to the KS, |
| command (page 179). |
268
