Agilent Technologies N9030a manual Tdf, Trace Data Format

Programming Commands

TDF Trace Data Format

TDF

Trace Data Format

Syntax

TDF

SP P ;

ALF

I

CR

M

B SP

?,

The preset value for TDF is P.

Legacy Products

8560 series, 8566A/B, 8568A/B

Description

Formats trace information for return to the controller.

The different trace data formats are as follows:

•M selects the ASCII data format.

•P selects parameter data format. Numbers are in Hz, Volts, Watts, dBm, dBmV, DBuV, DBV.

•Specifying A returns data as an A-block data field. The MDS command determines whether data comprises one or two 8-bit bytes. (See MDS (page 234))

•Specifying I returns data as an I-block data field. The MDS command determines whether data comprises one or two 8-bit bytes. (See MDS (page 234))

•B selects binary data format. The MDS command determines whether data comprises one or two 8-bit bytes

332