![](/images/new-backgrounds/1033321/33321355x1.webp)
Programming Commands
IP Instrument Preset
IP
Instrument Preset
Syntax
IP;
LF
CR
SP
,
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
Performs an instrument preset, setting the analyzer back to its factory settings. IP does not affect the contents of any data or trace registers or stored preselector data. IP does not clear the input or output data buffers on the
Instrument preset automatically occurs when you turn on the analyzer. IP is a good starting point for many measurement processes. When IP is executed remotely, the analyzer does not necessarily execute a complete sweep, however. You should execute a take sweep (TS) to ensure that the trace data is valid after an IP.
The N9061A application executes this command after any language switch on the
NOTE | The functions of the IP command are identical to the KST command (page 210). |
|
|
NOTE | If the external amplifier gain has been set, executing an IP command does not reset |
| this value. This is to protect the analyzer. |
|
|
178