![](/images/new-backgrounds/1033321/33321357x1.webp)
Programming Commands
KS, Mixer Level
KS,
Mixer Level
Syntax
KS, SP
?
real
OA
DM ;
MV
UV
Legacy Products
8566A/B, 8568A/B
Description
The KS, command specifies the maximum signal level that is applied to the input mixer for a signal that is equal to or below the reference level.
The effective mixer level is equal to the reference level minus the input attenuator setting. When KS, is activated, the effective mixer level can be set from
As the reference level is changed, the coupled input attenuator automatically changes to limit the maximum signal at the mixer input to your specified setting for signals less than or equal to the reference level.
NOTE | If the external amplifier gain has been set, executing an IP command will not reset |
| this value. This is to protect the analyzer. |
|
|
NOTE | The functions of the KS, command are identical to the ML command (page 267). |
|
|
179