Agilent Technologies N9030a manual Nrpos, Normalized Reference Position

Programming Commands

NRPOS Normalized Reference Position

NRPOS

Normalized Reference Position

Syntax

NRPOS SP

SP

?

number

UP

DN

OA

;

LF

CR

SP

,

The preset value is 10.

Legacy Products

8560 series

Description

The NRPOS command adjusts the normalized reference-position that corresponds to the position on the graticule where the difference between the measured and calibrated traces reside. The dB value of the normalized reference position is equal to the normalized reference level. The normalized reference position can be adjusted between 0.0 and 10.0, corresponding to the bottom and top graticule lines, respectively.

274