![](/images/new-backgrounds/1033321/33321197x1.webp)
Programming Commands
ADJALL LO and IF Adjustments
ADJALL
LO and IF Adjustments
Syntax
ADJALL ;
LF
CR
SP
,
Legacy Products
8560 series
Description
The ADJALL command activates the RF local oscillator (LO) and intermediate frequency (IF) alignment routines. These are the same routines that occur when the analyzer is switched on. They are also the same routines that are performed when you press System, Alignments, Align Now, All.
Commands following ADJALL are not executed until after the analyzer has finished the alignment routines.
99