Programming Commands
KSx External Trigger
KSx
External Trigger
Syntax
KSx ;
Legacy Products
8566A/B, 8568A/B
Description
The KSx command activates the normal external trigger mode. When the KSx command is executed, the RF input signal is only displayed when the external trigger level exceeds the trigger threshold level.
NOTE | If an 8566A/B or an 8568A/B analyzer is in zero span and the sweep time is less |
| than 20 msec, the display only gets refreshed when a fresh trace has been taken. |
| This can cause the displayed trace to flicker. |
| In the N9061A application of |
| continuously, so all traces are therefore free of flicker. |
|
|
NOTE | The functions of the command KSx are identical to the TM EXT command |
| (page 337). |
|
|
212
