![](/images/new-backgrounds/1033321/33321169x1.webp)
Programming Commands
ACPBRPER Adjacent Channel Power Burst Period
ACPBRPER
Adjacent Channel Power Burst Period
Syntax
ACPBRPER SP
?
real
S ;
MSLF
US
CR
SC
SP
,
Legacy Products
8560 series
Description
The ACPBRPER command sets the cycle time (period) of the burst RF signal. The cycle time is needed to set the sweep times when using the peak, two bandwidth, burst power, and gated methods for adjacent channel power measurements.
NOTE | The N9061A application supports the ACP measurement using the ANALOG |
| method only and therefore, although the user can set ACPBRPER, it does not do |
| anything when in RLC mode. |
85