Agilent Technologies N9030a manual Setting up N9061A on the X-Series Analyzer

Getting Started

Setting up N9061A on the X-Series Analyzer

Setting up N9061A on the X-Series Analyzer

Figure 1-1is an example mode menu map showing the N9061A (Remote Language Compatibility) application selection on your signal analyzer. To select the N9061A application, press the Mode hardkey on the X-Series analyzer front panel and then select the Remote Language Compatibility mode. If there are more than six modes on the signal analyzer, then use the More button to find the Remote Language Compatibility selection.

Figure 1-1 Example Mode Menu Map for X-Series Analyzers

Mode

Mode

Spectrum

Analyzer

IQ Analyzer (BASIC)

W-CDMA with

HSDPA/PSUPPA

Phase Noise

Remote

Language

Compatibility

27