![](/images/new-backgrounds/1033321/33321575x1.webp)
Programming Commands
PP Preselector Peak
PP
Preselector Peak
Syntax
PP
;
LF
CR
SP
,
Legacy Products
8560 series, 8566A/B
Description
The PP command optimizes preselector tracking to peak the amplitude of a signal at the active marker. If a marker is not on the screen, PP places a marker at the highest signal level, and optimizes preselector tracking at that frequency.
NOTE | This command is only supported when the |
| frequency limit is greater than 3.6 GHz. If the command is issued on an analyzer |
| with a maximum frequency limit of 3.6 GHz or less the command is not |
| implemented and no error is generated. |
288