MEMORY DIALING (RECALL)
To call a number stored in memory, press TALK to get a dial tone; press MEM- ORY button. Press the keypad number you assigned to that number and your phone will automatically dial the number. NOTE: for longer numbers which you have stored in two different I.D. numbers, follow steps above, pressing MEMORY button again before entering the second number. Use the memory sticker card provided to write down the names of each memory position. Keep this in any covenient place.
TALK
+
MEMORY
+
I.D.#
= MEMORY DIAL
OUT-OF-RANGE SIGNAL
If three beeps are heard immediately after the TALK button is pressed, the handset is too far away from the base. The handset and TALK indicator will automatically turn off. Move closer to the base and then try your call again.
POWER FAILURE RESET
After a power failure in your home (or any time you unplug your phone from AC power and then reconnect it), you must return the cordless handset to the base for about 15 seconds. This automatically matches the digital security codes.
PULSE/TONE SWITCH
Your Cobra Intenna cordless phone can be used with any phone system because it is switchable from pulse to tone dialing (see switch on back of the base) depending on which service you are using. Mixed PULSE and TONE dialing may be used (to access certain
RINGER SWITCH
The OFF/ON switch (located on back of the base) con- trols your cordless handsetÕs electronic ringer; no ring will sound in the OFF position.
PULSE TONE
OFF ON
RINGER
SECUR-LOC®
This exclusive Cobra electronic circuitry is an added security measure to protect your phone line from being accidentally accessed by a neighbor's cordless phone.
11
