Wall Mounting Instructions
The following steps enable installation on a new or existing telephone wall- mounting plate or directly onto a wall. (Your Cobra Intenna is designed to be used with any AT & T, GTE, local phone company or other
¥Run telephone cord through cord wrap channel on bottom of base. (As shown).
¥Plug modular phone connector into telephone wall jack.
¥Align mounting studs on the plate to the holes on the bottom of the Intenna base; push base onto studs and slide down on the wall plate.
Modular Phone Jack
Diagram #2: In-
stallation on a telephone wall- mounting plate
Mounting Studs
¥Attach the power adapter to the POWER connection (on the base of the phone) and plug into a household AC power outlet.
¥To install directly on any wall, youÕll need to provide two screws and wall anchors; follow these steps:
ÑDrill two holes 3 1Ú4" apart and insert the wall anchors.
ÑDrive the screws into the anchors until the head of each screw is protruding about 1/8" from the wall.
ÑAlign the holes in the cordless base over the screw heads; push base in and slide down on screws (see diagram #3).
ÑPlug modular phone connector into telephone wall jack; attach the power adapter to the POWER connection (on the base of the phone) and plug into to a household AC power outlet.
Screw Heads
Diagram #3: Installation directly on a wall
Modular Phone Jack | 7 |
