OPERATING INSTRUCTIONS

NOTE: For additional references to the parts listed below, refer to the Assembly

Diagram on page 12.

1.CAUTION: Prior to beginning to use, make sure the Safety Switch (part #32) is in its “OFF” position and the Power Cord/Plug (part #34) is unplugged from its electrical outlet. (See Figures C, D, and Assy. Diagram.)

2.Make all necessary adjustments to the Disc Sander as previously discussed. Make sure the distance between the Work Table (part #7) and Sanding Disc and Sanding Disc (part #14) does not exceed 1/16”.

3.Plug the Power Cord/Plug (part #34) into the nearest 120 volt, grounded, 3- prong, electrical outlet. (See Figure B, and Assy. Diagram.)

4.Turn the Safety Switch (part #32) to its “ON” position, and allow sufficient time for the Sanding Disc (part #14) to spin at full speed for 2 to 3 minutes. Check for proper sanding disc alignment. (See Figure B, and Assy. Diagram.)

5.With both hands, slowly and carefully place the workpiece on the Work Table

(part #7) and against the flat edge of the Miter Gauge (part #3), taking care not to allow the workpiece to immediately touch the spinning Sanding Disc (part #14).

(See Figure B, and Assy. Diagram.)

6.With both hands, firmly hold the workpiece down on the Work Table (part #7) and against the Miter Gauge (part #3). While holding the workpiece with one hand, use the other hand to grasp the Miter Gauge and slowly push the workpiece into the spinning Sanding Disc. CAUTION: ALWAYS KEEP HANDS AND FINGERS

AWAY FROM THE SANDING DISC. (See Figures B, D, and Assy. Diagram.)

7.NOTE: Make sure to feed the workpiece gradually into the spinning Sanding Disc. Do not force the machine to remove material faster than it was designed to sand. If necessary, use the Miter Gauge (part #3) to back the workpiece away from the spinning Sanding Disc (part #14) and repeat Step #6 until the desired amount of material has been sanded off the workpiece.

(See Figures B, D, and Assy. Diagram.)

8.Once the sanding job is completed, back the workpiece slightly away from the spinning Sanding Disc (part #14). Keep a firm grip on the workpiece with one hand, and with the other hand turn the Safety Switch (part #32) to its “OFF” position. Wait until the Sanding Disc has completely stopped spinning. Then, remove the workpiece from the machine and unplug the Power Cord/Plug (part #34) from its electrical outlet. (See Figures B, C, D, and Assy. Diagram.)

SKU 47404

For technical questions, please call 1-800-444-3353.

Page

Page 8 Page 10
Page 9
Image 9
Harbor Freight Tools 47404 operating instructions Operating Instructions, See Figure B, and Assy. Diagram
Page 8 Page 10

47404 specifications

Harbor Freight Tools 47404 is an innovative and versatile tool that has gained significant attention from both DIY enthusiasts and professional tradespeople for its outstanding performance and value. This tool, often regarded as a reliable option in the budget tool market, stands out for its well-thought-out features and user-friendly design.

One of the key characteristics of the Harbor Freight Tools 47404 is its robust build quality. Constructed from high-grade materials, this tool is designed to withstand the rigors of daily use. Its durable construction not only ensures longevity but also enhances user safety, making it a trustworthy choice for various applications, from light home tasks to heavier industrial jobs.

The 47404 model boasts an ergonomic design that prioritizes user comfort. The handles are crafted to fit comfortably in the hand, reducing fatigue during prolonged use. This is particularly beneficial for those who use the tool for extended periods, as it allows for better control and precision while minimizing the risk of strain or injury.

A standout feature of the Harbor Freight Tools 47404 is its versatility. It includes various attachments and accessories that enable users to tackle a wide range of tasks with ease. Whether you are cutting, grinding, or polishing, this tool is capable of adapting to different requirements, making it an essential addition to any workshop.

Another significant aspect of the Harbor Freight Tools 47404 is its innovative technology. Incorporating advanced engineering, the tool delivers efficient and effective performance. Its powerful motor ensures consistent results, while the innovative design minimizes noise and vibration, providing a more pleasant user experience.

Safety features are also integral to the 47404 model, which is equipped with protective guards and safety switches. These elements serve to enhance the overall user experience by minimizing accident risks, making it suitable for both novices and seasoned professionals alike.

In summary, Harbor Freight Tools 47404 represents a blend of durability, versatility, and user-friendliness, making it a popular choice in the tool industry. With its robust construction, ergonomic design, innovative technology, and safety features, this tool is well-equipped to meet the diverse needs of users across various applications. Whether for small DIY projects or larger industrial tasks, the Harbor Freight Tools 47404 delivers consistent performance and value, making it a worthy investment for any toolkit.
Top Page Image Contents