HP 4250/4350 manual EIO Error, 8X.YYYY Embedded, Jetdirect Error, Binname Full, Menus Locked

Interpreting control-panel messages (continued)

Control panel message	Description
8X.YYYY	The EIO accessory card in slot [X] has
EIO ERROR	encountered a critical error.

8X.YYYY EMBEDDED	The embedded HP Jetdirect print server
JETDIRECT ERROR	has encountered a critical error.

Recommended action

1.Turn the printer power off and then on.

2.Turn the printer power off, reseat the EIO accessory in slot [X], and then turn the printer power on.

3.Turn the printer power off, remove the EIO accessory from slot [X], install it in a different EIO slot, and then turn the printer power on.

4.Replace the EIO accessory in slot [X].

1.Turn the printer power off and then on.

2.If the message persists, contact an HP-authorized service or support provider (see HP customer care).

<BINNAME> FULL	The indicated output bin [BINNAME] is
Remove all paper	full, and printing cannot continue.
from bin

Empty the bin so that the current print job can finish.

<BINNAME> FULL Remove all paper from bin

alternates with

<current status message> Access denied

MENUS LOCKED

BAD DUPLEXER CONNECTION For help press

BAD ENV FEEDER CONNECTION

Canceling...

The indicated output bin [BINNAME] is full, but it is not needed for the current print job.

The printer control panel function you are trying to use has been locked to prevent unauthorized access.

The optional duplexer is not properly connected to the printer.

The optional envelope feeder is not connected properly to the printer.

The printer is canceling a job. The message continues while the job is stopped, the paper path is cleared, and any remaining incoming data on the active data channel is received and discarded.

Empty the bin before sending a job to that bin.

See your network administrator.

1.Make sure that you are using the right-angle power cord that came with the printer.

2.Try removing and reinstalling the optional duplexer. Then turn the printer power off and back on.

Try removing and reinstalling the optional envelope feeder. Then, turn the printer power off and back on.

No action necessary.

156 Chapter 4 Problem solving ENWW