HP 4250/4350 manual 66.XY.ZZ Output, Permanent, Storage Write Fail, Storage Error Settings Changed

Interpreting control-panel messages (continued)

Control panel message	Description
66.XY.ZZ OUTPUT	An error occurred in an external paper-
DEVICE FAILURE	handling accessory.

Recommended action

1.Turn the printer power off.

2.Check that the accessory is properly seated on and connected to the printer, without any gaps between the printer and the accessory. If the accessory uses cables, disconnect and reconnect them.

3.Turn the printer power on.

4.If the error reappears, record the message, and contact HP Customer Support. (See HP customer care.)

68.X PERMANENT STORAGE FULL For help press

alternates with

68.X PERMANENT STORAGE FULL To continue press

The printer permanent storage is full. Some settings might have been reset to the factory defaults.

1.If the error does not clear, turn printer off then on.

2.Print a configuration page and check the printer settings to determine which values have changed. See Configuration page.

3.Turn the printer power off, then press and hold MENU while turning the printer on to clean up permanent storage.

4.If the error reappears, record the message and contact an HP- authorized service or support provider (see HP customer care).

68.X PERMANENT	The storage device is failing to write.
STORAGE WRITE FAIL	Printing can continue, but there might be
	some unexpected behaviors because an
To continue press	error occurred in permanent storage.

Press (SELECT button) to continue.

If the error does not clear, turn the printer off then on. If error reappears, record the message and contact an HP- authorized service or support provider (see HP customer care).

68.X STORAGE ERROR SETTINGS CHANGED For help press

alternates with

68.X STORAGE ERROR

SETTINGS CHANGED

To continue press

An error occurred in the printer permanent storage and one or more printer settings has been reset to its factory default.

Press (SELECT button) to clear the message, and press (SELECT button) to resume printing.

Print a configuration page and check the printer settings to determine which values have changed. See Configuration page.

If the error does not clear, turn printer off then on. If the error reappears, record the message and contact an HP- authorized service or support provider (see HP customer care).

154 Chapter 4 Problem solving ENWW