HP 4250/4350 manual Unsupported Data on FS Dimm in Slot, USE Tray XX Typesize, Warming UP

Interpreting control-panel messages (continued)

Control panel message Unable to store job <JOBNAME>

alternates with

<current status message>

UNSUPPORTED DATA ON [FS] DIMM IN SLOT X

To clear press

USE TRAY XX [TYPE][SIZE]

To change press / To use press

WAITING FOR

TRAY XX TO LIFT

alternates with

<current status

message>

WARMING UP

alternates with

<current status

message>

Description

The print job named cannot be stored due to a memory, disk, or configuration problem.

The data on the DIMM is not supported. [FS] stands for either ROM or FLASH.

The printer did not detect the type and size of media requested. The message shows the most likely type and size available and the tray in which they are available.

The specified tray is in the process of lifting the paper to the top of the tray for proper feeding.

The printer is coming out of powersave mode. Printing will continue as soon as it is done.

Recommended action

Correct the error and then try again to store the job.

The DIMM may need to be replaced. Turn the printer power off before removing it.

Press (SELECT button) to continue.

Press (SELECT button) to accept the values in the message, or use (UP button) and (DOWN button) to scroll through the available choices.

No action necessary.

No action necessary.

168 Chapter 4 Problem solving ENWW