HP 4250/4350 RAM Disk Device Failure, RAM Disk File Operation Failed, RAM Disk not Initialized

Interpreting control-panel messages (continued)

Control panel message

RAM DISK DEVICE

FAILURE

To clear press

alternates with

<current status

message>

RAM DISK FILE

OPERATION FAILED

To clear press

alternates with

<current status

message>

RAM DISK FILE

SYSTEM IS FULL

To clear press

alternates with

<current status message>

RAM DISK IS WRITE PROTECTED To clear press

alternates with

<current status

message>

RAM DISK NOT

INITIALIZED

To clear press

alternates with

<current status

message>

REINSERT DUPLEXER

Description

The RAM disk had a critical failure and can no longer be used.

The requested operation could not be performed. You might have attempted an illegal operation, such as trying to download a file to a non existent folder.

The RAM disk is full.

The RAM disk is protected, and no new files can be written to it.

The file system has not been initialized.

The duplexer has been removed.

Recommended action

Contact an HP-authorized service or support provider.

Try printing again to an existing folder.

1.Delete files and then try again, or turn the printer power off, and then turn the printer power on to delete all files on the device. (Use Device Storage Manager in HP Web Jetadmin or another software utility to delete the files.

2.If the message persists, increase the size of the RAM disk. Change the RAM disk size on the System Setup submenu (on the Configure Device menu) at the printer control panel. See the description of the RAM disk menu items in System Setup submenu.

Use the Device Storage Manager in HP Web Jetadmin to disable the write protection.

Use HP Web Jetadmin to initialize the file system.

Reinsert the duplexer.

164 Chapter 4 Problem solving ENWW