HP 4250/4350 manual Changing printer-control-panel configuration settings, Job storage limit

CAUTION

NOTE

NOTE

ENWW

Changing printer-control-panel configuration settings

By using the printer control panel, you can make changes to general printer configuration default settings such as tray size and type, sleep delay, printer personality (language), and jam recovery.

The printer-control-panel settings can also be changed from a computer by using the setting page of the embedded Web server. The computer shows the same information that the control panel shows. For more information, see Using the embedded Web server.

Configuration settings seldom need to be changed. Hewlett-Packard Company recommends that only the system administrator change configuration settings.

Changing control-panel settings

For a complete list of menu items and possible values, see Control panel menus. Certain menu options appear only if the associated tray or accessory is installed. For example, the EIO menu appears only if an EIO card is installed.

To change a control-panel setting

1.Press MENU to open the menus.

2.Use (UP button) or (DOWN button) to scroll to the menu that you want, and then press (SELECT button).

3.Some menus might have several submenus. Use (UP button) or (DOWN button) to scroll to the submenu item that you want, and then press (SELECT button).

4.Use (UP button) or (DOWN button) to scroll to the setting, and then press (SELECT button). Some settings change rapidly if (UP button) or (DOWN button) is held down. An asterisk (*) appears next to the selection on the display, indicating that it is now the default.

5.Press MENU to exit the menu.

Printer-driver settings override control-panel settings. Software program settings override both printer-driver settings and control-panel settings. If you cannot gain access to a menu or item, it is either not an option for the printer or you have not turned on the associated higher-level option. See your network administrator if a function has been locked (Access denied menus locked appears on the printer control-panel display).

Job storage limit

This option sets the limit for the maximum number of jobs that can be stored on the hard drive at the printer. The maximum number allowed is 100, and the default value is 32.

This option is only available if a hard drive is installed.

Control panel 15