HP 4250/4350 manual SET Print Test Registration Source Adjust Tray N

Item	Values
SET	PRINT TEST PAGE
REGISTRATION	SOURCE
	ADJUST TRAY [N]

Explanation

Shifts the margin alignment to center the image on the page from top to bottom, and left to right. You can also align the image that is printed on the front with the image that is printed on the back.

PRINT TEST PAGE: Prints a test page that shows the current registration settings.

SOURCE: allows you to select the tray for which you want to print the test page. If installed, optional trays appear as selections, where [N] is the number of the tray.

ADJUST TRAY N: sets the registration for the specified tray, where [N] is the number of the tray. A selection appears for each tray that is installed, and registration must be set for each tray.

●X1 SHIFT: Registration of the image on the paper from side to side, as the paper lies in the tray. For duplexing, this side is the second side (back) of the paper.

●X2 SHIFT: Registration of the image on the paper from side to side, as the paper lies in the tray, for the first side (front) of a duplexed page. This item appears only if an optional duplexer is installed and enabled. Set the X1 SHIFT first.

●Y SHIFT: Registration of the image on the paper from top to bottom as the paper lies in the tray.

ENWW Configure Device menu 217