HP 4250/4350 manual Clearable warnings, Auto continue, To set the personality

To set the personality

1.Press MENU to open the menus.

2.Press (DOWN button) to highlight CONFIGURE DEVICE.

3.Press (SELECT button) to select CONFIGURE DEVICE.

4.Press (DOWN button) to highlight SYSTEM SETUP.

5.Press (SELECT button) to select SYSTEM SETUP.

6.Press (DOWN button) to highlight PERSONALITY.

7.Press (SELECT button) to select PERSONALITY.

8.Press (UP button) or (DOWN button) to select the appropriate personality (AUTO, PS, PCL, or PDF).

9.Press (SELECT button) to set the personality.

10.Press MENU to exit the menu.

Clearable warnings

You can determine the display time for control-panel clearable warnings with this option by selecting ON or JOB. The default value is JOB.

●Select ON to show clearable warnings until you press (SELECT button).

●Select JOB to show clearable warnings until the end of the job in which they were generated.

To set the clearable warnings

1.Press MENU to open the menus.

2.Press (DOWN button) to highlight CONFIGURE DEVICE.

3.Press (SELECT button) to select CONFIGURE DEVICE.

4.Press (SELECT button) to highlight SYSTEM SETUP.

5.Press (SELECT button) to select SYSTEM SETUP.

6.Press (DOWN button) to highlight CLEARABLE WARNINGS.

7.Press (SELECT button) to select CLEARABLE WARNINGS.

8.Press (UP button) or (DOWN button) to select the appropriate setting.

9.Press (SELECT button) to set the selection.

10.Press MENU to exit the menu.

Auto continue

You can determine printer behavior when the system generates an Auto Continuable error. ON is the default setting.

●Select ON if you want an error message to appear for ten seconds before the printer automatically continues to print.

●Select OFF to pause printing any time an error message appears and until you press (SELECT button).

ENWW Control panel 21