HP 4250/4350 Stapler/stacker submenu, Cartridge Stop OUT Continue JAM Recovery Auto OFF RAM Disk

Item	Values
CARTRIDGE	STOP
OUT	*CONTINUE

JAM RECOVERY	*AUTO
	OFF
	ON

RAM DISK	*AUTO
	OFF

LANGUAGE*ENGLISH Several

Explanation

Determines how the printer reacts if the print cartridge is empty.

STOP: The printer stops printing until you replace the print cartridge.

CONTINUE: The printer continues to print, and the REPLACE CARTRIDGE message appears until you replace the print cartridge. HP does not guarantee print quality if you select CONTINUE after a REPLACE CARTRIDGE condition. Replace the print cartridge as soon as possible to ensure good print quality.

If the end of drum life is reached, the printer stops, regardless of the CARTRIDGE OUT setting.

Determines how the printer behaves if a jam occurs.

AUTO: The printer automatically selects the best mode for printer jam recovery (usually ON).

OFF: The printer does not reprint pages following a jam. Printing performance might be increased with this setting.

ON: The printer automatically reprints pages after a jam is cleared.

Determines how the RAM disk is configured. This item appears only if no optional hard-disk accessory is installed.

AUTO: Allows the printer to determine the optimal RAM-disk size based on the amount of available memory.

OFF: The RAM disk is not available.

NOTE

If you change the setting from OFF to AUTO, the printer automatically reinitializes when it becomes idle.

Selects the language for the messages that appear on the printer control-panel display.

Stapler/stacker submenu

Use this submenu to select settings for the optional stapler/stacker, if it is installed.

Some items on this menu are available in the program or printer driver (if the appropriate driver is installed).

The section that follows lists the settings and possible values. In the Values column, the default value for each setting is the one that has an asterisk (*) next to it.

224 Appendix B Control panel menus ENWW