Orientation of paper when a stapler is installed

When an optional stapler/stacker is installed, the printer automatically rotates the printed images 180° on all paper sizes, even if the job is not stapled. If you are printing on paper that requires a specific orientation, such as letterhead, preprinted paper, prepunched paper, and paper with watermarks, make sure that the paper is loaded correctly in the tray. The correct orientation of the paper in the trays is shown below.

1

2

1Tray 1, single-sided print jobs

2All other trays, single-sided print jobs

For single-sided printing and stapling from tray 1, load the paper with the front side facing up

and the top edge toward you. For single-sided printing and stapling from all other trays, load

the paper with the front side facing down and the top edge toward the printer.

1

2

1Tray 1, duplex print jobs

2All other trays, duplex print jobs

For duplex (two-sided) printing and stapling from tray 1, load the paper with the front side facing down and the top edge toward the printer. For duplex printing and stapling from all other trays, load the paper with the front side facing up and the top edge toward you.

58

Chapter 2 Printing tasks

ENWW

Page 70
Image 70
HP 4250/4350 manual Orientation of paper when a stapler is installed