HP 4250/4350 manual Optimize High Transfer Line Detail Restore Optimize

Item	Values
FUSER MODES	PLAIN
	PREPRINTED
	LETTERHEAD
	TRANSPARENCY
	PREPUNCHED
	LABELS
	BOND
	RECYCLED
	COLOR
	LIGHT 60-75 G/M2
	CARDSTOCK
	ROUGH
	ENVELOPE

OPTIMIZE	HIGH TRANSFER
	LINE DETAIL
	RESTORE OPTIMIZE

Explanation

Configures the fuser mode associated with each paper type.

Change the fuser mode only if you are experiencing problems printing on certain media types. After you select a type of media, you can select a fuser mode that is available for that type. The printer supports the following modes:

NORMAL: Used for most types of paper.

HIGH 1: Used for rough paper.

HIGH 2: Used for paper that has a special or rough finish.

LOW 1: Used for lightweight media. Use this mode if you are having problems with curled paper.

LOW 2: Used for transparencies.

CAUTION

Do not change the fuser mode for transparencies. Failure to use the LOW 2 setting while printing transparencies can result in permanent damage to the printer and fuser. Always select Transparencies as the Type in the printer driver and set the tray type at the printer control panel to TRANSPARENCY.

When selected, RESTORE MODES resets the fuser mode for each media type back to its default setting.

HIGH TRANSFER: Set to ON if you are using highly resistive, lower-quality papers. HP recommends using only HP paper and print media.

LINE DETAIL: Set to ON to improve the appearance of lines if scattered lines are appearing.

RESTORE OPTIMIZE: Returns to the defaults for the Optimize settings.

218 Appendix B Control panel menus ENWW