HP 4250/4350 manual ROM Disk is Write Protected, ROM Disk not Initialized, Size Mismatch Tray

Interpreting control-panel messages (continued)

Control panel message

ROM DISK IS

WRITE PROTECTED

To clear press

alternates with

<current status

message>

ROM DISK NOT

INITIALIZED

To clear press

alternates with

<current status message>

SANITIZING DISK <X>% COMPLETE Do not power off

alternates with

CLEANING DISK

<X>% COMPLETE

For help press

SIZE MISMATCH IN

TRAY XX

For help press

alternates with

<current status message>

Description

The disk is protected, and no new files can be written to it.

The file system has not been initialized.

A hard disk or a CompactFlash card is being sanitized.

The tray indicated is loaded with a different size of paper than the size configured for the tray.

Recommended action

Use the Device Storage Manager in HP Web Jetadmin to disable the write protection.

Use HP Web Jetadmin to initialize the file system.

No action necessary.

Load the tray with the size configured for the tray.

Make sure that the guides are positioned correctly in the tray, and then make sure that the knob is set correctly to Standard or Custom.

STAPLER LOW ON STAPLES

Fewer than 70 staples remain in the optional stapler/stacker cartridge. Printing continues until the cartridge runs out of staples, and the STAPLER OUT OF STAPLES message appears on the printer control panel display.

Replace the staple cartridge. For information about replacing the staple cartridge, see Loading staples. For information about ordering a new staple cartridge, see Part numbers.

166 Chapter 4 Problem solving ENWW