HP 4250/4350 manual Selecting the correct fuser mode, Quality submenu

Selecting the correct fuser mode

	The printer automatically adjusts the fuser mode based on the media type to which the tray
	is set. For example, heavy paper, such as card stock, might need a higher fuser-mode
	setting in order to make the toner adhere better to the page, but transparencies need the
	LOW fuser-mode setting to avoid damage to the printer. The default setting generally
	provides the best performance for most print-media types.
	The fuser mode can be changed only if the media type has been set for the tray that you are
	using. (See Printing by type and size of media (locking trays).) After the media type has
	been set for the tray, then the fuser mode for that type can be changed on the CONFIGURE
	DEVICE menu in the PRINT QUALITY submenu at the printer control panel. (See Print
	Quality submenu.)
	Using a higher fuser mode, such as HIGH 1 or HIGH 2, improves the ability of the toner to
NOTE
	adhere to paper, but it might cause other problems, such as excessive curl. The printer
	might print at a slower speed when the fuser mode is set to HIGH 1 or HIGH 2.
	To reset the fuser modes to the default settings, open the CONFIGURE DEVICE menu at
	the printer control panel. On the PRINT QUALITY submenu, select FUSER MODES, and
	then select RESTORE MODES.

ENWW Selecting the correct fuser mode 47