HP 4250/4350 manual Resets submenu, Restore Factory Settings

Item Values

EMBEDDEDTCP/IP

JETDIRECT MENU IPX/SPX APPLETALK DLC/LLC SECURE WEB DIAGNOSTICS

Resets submenu

Explanation

TCP/IP: Select whether the TCP/IP protocol stack is enabled or disabled. You can set several TCP/IP parameters.

Select the TCP/IP CONFIGURE METHOD to configure the EIO card. For the MANUAL option, set the values for IP ADDRESS , SUBNET MASK , LOCAL GATEWAY, and DEFAULT GATEWAY.

IPX/SPX: Select whether the IPX/SPX protocol stack (in Novell NetWare networks, for example) is enabled or disabled.

APPLETALK: Enable or disable an AppleTalk network.

DLC/LLC: Select whether the DLC/LLC protocol stack is enabled or disabled.

SECURE WEB: Specify whether the embedded Web server accepts communications by using only secure HTTP (HTTPS) or by using both HTTP and HTTPS.

DIAGNOSTICS: Provides tests to help diagnose network hardware or TCP/IP network connection problems.

Items on the Resets submenu relate to returning settings to the defaults and changing settings such as Sleep Mode.

The section that follows lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk (*) next to it.

Item

RESTORE

FACTORY

SETTINGS

Values

There is no value to select.

Explanation

Performs a simple reset and restores most of the factory (default) settings. This item also clears the input buffer for the active I/O.

CAUTION

Restoring memory during a print job cancels the print job.

226 Appendix B Control panel menus ENWW